ATMP Na5, ATMP Pentasodium
20592-85-2 (x-Na), 2235-43-0 (5-Na)
ATMP Na5 has the capacity to get used in circulating cool system. The same as inside electrical power factory, oil, and gas refinery factory as well as oilfield re-fill water system. ATMP pentasodium provides very good | fantastic synergistic effects along with different chemicals inside neutral and an acidic situation. Absolutely no ammonia odor will be let off.
During business manufacturing, we quite often use ATMP Na5 to handle scale and water corrosion of apparatus. The actual pentasodium of ATMP is really a practical and efficient chemical treatment plan. And it’s also fairly easy to apply.
Firstly ATMP Na5 mixes together with the metallic substances contained inside the water. And also the metal ions that react with some other chemicals to build scale are usually limited. And also Ca2+ is stopped from being precipitated. At the time applied to the place, ATMP penta sodium will even break down the scale which has been produced towards the maximum extent. And it also additional decreases the sedimentation rate of the scale. ATMP Na5 also reduce the probability of scale formation.
Besides the effect of scale inhibition, ATMP penta sodium also provides a particular sustained release of scale formation. Generally, ATMP Na5 will certainly directly form a protective film around the steel surface. This protective film is much more hard to be dissolved. And it prevents the oxidation reaction between the metal and the air, thereby protecting it.
|Appearance||Colorless or light yellow transparent liquid|
|Active content (ATMP)%||27.8 – 30.7|
|Active content (ATMP Na5) %||38.0 – 42.0|
|Total phosphoric acid(PO43-) %||26.6-28.6|
|Chloride (as Cl–) %||1.0 max|
|PH (1% water solution)||10.0 – 11.0|
|Density (20℃) g/cm3||1.38 – 1.48|
ATMP Na5 can be used along with some other organophosphonic acid, polycarboxylic acid or salt to develop organic alkaline chemicals. It really is applied inside the circulating cool water system for all those water quality.
ATMP Na5 is able to improve corrosion inhibition performance. Make it appropriate for much more requiring and more extensive conditions, as well as lower the cost of medications.
It also is preferable to comply with the actual conditions for putting in corrosion and scale inhibitors the moment adding ATMP pantasodium. If the device together with the addition of ATMP Na5 is set up improperly, it’s going to cause a great deal of waste. That will certainly also raise the cost of water treatment.
While using a rise in the application of ATMP Na5 in the factory, the occurrence of wrong use has taken place. The added equipment is usually to be set up in the inlet of the reagent. And also the correct installation of the device makes it much easier to add reagents.
Take notice of the added quantity at the time putting in ATMP Na5. When you add an excessive amount of, it’s going to overflow. When using the scale inhibitor set up, confirm the correctness of the set up before using it.
Package and Storage:
200L plastic drum, IBC(1000L), customers’ requirement.
Storage for ten months in a shady room and dry place.