banner

IR-0100 RO Antiscalant and Dispersant

Properties:

IR-0100 is a high-effective scale inhibitor. It is suitable for reverse osmose (RO), nanofiltration (NF) and ultrafiltration (UF) system. IR-0100 RO antiscalant and dispersant can inhibit the scale deposit on the membrane surface, improve water quality, and lower the operation expanse.

This product has the following properties.

  1. Inhibit inorganic scale formation for a wide concentration span. The largest permitted LSI value is 2.8 when no acid is added.
  2. Not flocculate with ferric oxide, aluminum oxide, or silica oxide to form a suspended substance.
  3. Inhibit the pollution from ferric, aluminum, or heavy metals pollutants. The permitted ferric concentration for inlet water supply can reach 8.0 ppm.
  4. Inhibit the flocculate and deposit of silica. The permitted silica concentration for condensed side can reach 290 ppm.
  5. Be used in CA, TFC, NF, and UF membranes for RO systems.
  6. Good solubility and stability.
  7. Effective in pH 5~10.

Specifications:

ChemicalsApplication Area
AppearanceClear liquidClear transparent liquid
pH Value (1% water solution)2.0±0.52.0±0.5
Density (20℃), g/cm31.03~1.061.40~1.50
Main contentMicromolecular containing phosphorus
Decomposition product under high temperatureorthophosphate

Uses:

The dosage is determined by water quality analysis and the condition of the reverse osmose system. In the recommended dosage range, most scales can be under control, such as calcium carbonate, calcium sulfate, barium sulfate, ferric hydroxide, aluminum hydroxide, and silica.

The following formula can calculate the IR-0100 volumes required to add to the medicine box.

ir 0100
U—— condense liquid volumes required, Litre, (L).

Q—— reverse osmose water supply flow, tons/hour (T/h).

a—— dosage required, gram/ton, (ppm, g/T) (standard liquid).

V—— the effective volume of medicine box, liter (L).

ρ—— density of the IR-0100, kg/L, the density is 1.45.

x—— the actual flow of medicine operation pump, liter/hour (L/h).

1000 —— conversion coefficient.

8 —— condense index.

Notes: The value a (dosage required) can refer to the special software of QingLi Company.

Packing and Storage:

The original packing is eight times condensed liquid, 5 gallons (27.55kg) per barrel. After diluting eight times, 220.4 kilograms per barrel.

200L plastic drum

About Osmosis Rust Inhibitor.

Osmosis rust inhibitor is a super efficient synthetic osmotic agent. It penetrates strongly into rust, corrosion, and oil, thus removing rust and corrosion easily. It has the properties of penetrating and removing rust, loosening and lubricating, resisting corrosion, and protecting metal.

Osmosis rust inhibitors can form and store a lubricating film on the surface of metal parts, which can inhibit corrosion caused by moisture and many other chemicals.

Rust is due to the action of oxygen and water on the metal surface to produce a mixture of oxides and hydroxides. Iron rust is red, copper rust is green, and aluminum and zinc rust is white.

Rust is due to the action of oxygen and water on the metal surface to produce a mixture of oxides and hydroxides. Iron rust is red, copper rust is green, and aluminum and zinc rust is white.

It is difficult for machinery to operate and be stored without contact with oxygen, moisture, or other corrosive media in the air. These substances will rust by electrochemical corrosion on the metal surface. Osmosis rust inhibitor prevents rusting and stops the above substances from coming into contact with the metal.